Sep 30, 2023 Leave a message

What should we pay attention to when using casters in factories?

industrial nylon casters SS304

Casters: Visual inspection of casters for wear. Poor wheel rotation is related to small red, rope and other debris. Covers can hide these tangles of debris. Loosening or tightening wheels is another factor, replace damaged wheels to avoid erratic rotation. When inspecting and replacing rear wheels, lock washers and nuts must be tightened to the wheel axle. Looseness of the shaft will cause friction between the wheel and bracket and the mold. Wheels and bearings should be replaced to avoid production losses.

 

The user is responsible for the proper maintenance and operation of the manual hydraulic pallet handwheel. To avoid improper use or equipment, it should be overloaded and heavy duty special should be placed on the vehicle. High speeds or heavy collisions on rough roads can cause damage to wheels or equipment. Therefore, check regularly: Brackets and fasteners: Tighten loose shafts and nuts, check for damage to welds or support plates.

 

Overloading or impact can cause scaffolding to deform. Twisted supports tilt the weight on individual wheels, causing premature wheel failure. If it is a plug-type continuous casting machine, the nuts should be tightened or riveted firmly, the mounting bracket should not be bent, and the plug should be properly installed. When installing casters, lock nuts or lock washers should be used. The installation of the expansion plunger must ensure that the connecting rod is securely installed in the casing.

 

 

Any further questions please kindly let us know by sales@shangxincaster.com or whatsapp + 86 152 5836 8162

 

 

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry