Aluminum alloy profile steel pipe scaffolding is also called mobile quick-installed aluminum alloy profile steel pipe scaffolding, and it happens to be able to assist the aluminum alloy profile steel pipe scaffold to move quickly because of the casters. But in actual application, if the wrong caster is selected, it will cause a lot of trouble for the application. What kind of caster is more suitable for the application of aluminum alloy profile steel pipe scaffolding?
1. It is better to accept the key. Generally, the aluminum alloy profile steel pipe scaffold itself is not too heavy, but if there are objects on it, the net weight of all the iron frames will increase, and the load of the casters also seems very critical. Generally, the load of casters up to 720KG can basically reach the full load of all aluminum alloy profile steel pipe scaffolding.
2. Do not use iron parts as much as possible. Because of the conditions of the construction site, water may sometimes occur, or the aluminum alloy profile steel pipe scaffold may touch water due to the temperature. However, the aluminum alloy profile steel pipe scaffold itself is the aluminum alloy profile material, and it will not be affected by water. But if the caster has an iron part, it will definitely be harmed.
3. Casters with double pedal structure. There are generally two designs for locking and unlocking casters: single-pedal and double-pedal. The difference between them depends on whether the single-pedal pedal is stepped on or locked. When the pedal must be turned on and moved, it needs to be lifted up. It is very laborious to apply it, and it is more difficult to handle it after a long time. . There is no such problem in the double-pedal structure. He has pedaling parts on both sides of the casters. When you step on one side, you can brake and lock, and you can open it when you step on the other side. You don't need to pull it by hand. And the double-pedal structure has a load of 720KG, while the single-pedal structure is generally only 300-600KG.
What are the common problems in the selection of bowl buckle scaffold casters
1. When using bowl buckle scaffolding, the bottom end must be covered with scaffolding, and side protection railings and body guardrails should be set on both sides;
2. When it is necessary to buckle the scaffold, all staff should be allowed to descend from the steel pipe scaffolding work platform to the road in advance, and then they can move; 3. After moving in time, the brake pedal of the wheel should be stepped on and the wheel Child lock
4. During work, prevent the support frame from being subjected to unexpected level shocks and collisions;
5. It is forbidden to hang objects outside the support frame to prevent the support frame from tipping over due to heavy wheel weight;
6. At the construction site, it is not allowed to build a herringbone ladder on the work platform;
7. Two people should be prevented from moving from one side to the left side of the herringbone ladder at the same time to avoid the steel pipe scaffold from tipping over;
8. Steel scaffolding shall be fully inspected to check whether the connection of steel scaffolding, formwork support system, etc. are in compliance with the structural regulations, and the disassembly can only be carried out after the approval of the technical management process;
9. After the construction of the project, the steel scaffolding must be disassembled and assembled according to the upward and downward directions. The parts must be transferred one by one by manpower, or lifted one by one with ropes, or be disassembled in other special tools and methods that ensure that the steel scaffold will not be damaged. Install on the road surface, do not throw it down immediately.
In short, casters suitable for aluminum alloy profile steel pipe scaffolding applications need to meet some of the above requirements to meet.
