Aug 13, 2021 Leave a message

How to install the caster is easier to push and pull?

Regardless of whether it is an industrial caster or any other heavy caster, it is more important to install the caster. If it is installed properly, it is more flexible and labor-saving. Today, I will introduce how to install the caster that is easier to push and pull:


      1. The size of the caster has a certain effect on pushing and pulling


Usually five-inch and six-inch casters will be easier to push and pull, and it will be more labor-saving, so the general trolleys use five-inch and six-inch trolley casters. Everyone should note that the larger the diameter of the caster, the more labor-saving the push and pull, but it is moved. The goods will be more strenuous, so we have to weigh them. Especially for trolley casters, you can refer to "How to install trolley casters".


   2. Caster bracket


  Different caster materials, different installation methods, such as screw casters, directly inserted, and flat plate installation must be locked with screws, but can not affect the rotation.


  3. Caster bearings


   When the caster bearing is installed, the caster rotating motion bearing must always be vertical. This is the basic requirement, so that the installation is easier to push and pull, but there are many caster bearings. You can refer to "Six Common Caster Bearing Types".


   4. Installation under special environment


  Outdoors, coastal areas, areas with strong corrosiveness and/or harsh service conditions. The efficiency of casters will decrease, especially when the operating temperature is lower or higher than the above data, the listed normal load capacity may be affected. Specific products will be explained in detail. The complete caster is assembled from component parts. The manufacturer is only responsible for the complete caster made from the original part.


    In short, there are certain skills in how to install casters, and there are certain differences in the installation of different types of casters, but the above points are more general methods and principles, so it is usually easier to install casters by pushing and pulling!



Send Inquiry

whatsapp

Phone

E-mail

Inquiry