How to make the caster last longer is a concern for many users. Here are some key points:
1. The caster must be correctly and reliably installed in the designed position.
2. The installed caster bracket must be strong enough and the material must be reliable.
3. The function of the caster cannot be changed and is not affected by the installation device.
4. The rotating wheel axis must always be vertical.
5. The fixed casters must be in a straight line with their wheel axis.
6. If only swivel casters are used, they must be consistent.
7. If fixed casters are used in conjunction with swivel casters, all casters must be compatible with each other and must be recommended by the manufacturer.
If the caster is used in the following areas: outdoor, coastal areas, areas with strong corrosion and/or harsh conditions of use, special products must be specified. Under conditions of use below 5°C and above 30°C, the effectiveness of the caster will decrease, especially when the use temperature is lower or higher than the above data, the listed normal load capacity may be affected. Special products will be described in detail. The complete caster is assembled from the components. The manufacturer is only responsible for the complete caster manufactured from the original parts.
Routine maintenance of casters: lubrication of axles and swivel bearings; tightening of axles and/or adjustable center pins after installation. Any cleaning agents used must not contain corrosive and abrasive ingredients.
for any assistance please send email to sales@shangxincaster.com whatsapp: +86 152 5836 8162
