There are many manufacturers of medium-sized casters, and Shangxin Casters is one of the suppliers of medium-sized casters. Deformation of the bottom plate of casters is common. How to avoid deformation of medium-sized casters? The following Ningbo caster manufacturer, Shangxin Casters, will introduce you in detail 4 reasons for the deformation of the caster bottom plate.
1. The caster manufacturer should check the surface quality of the caster base plate by visual inspection or a magnifying glass with a magnification of 5 times.
2. The caster factory should deal with the fatigue test, impact test and simulation test of the caster bottom plate: test equipment test.
3. The load and dimensional tolerance, surface shape and position tolerance of the finished caster bottom plate should be checked after permanent deformation, but the load and dimensional tolerance should also be qualified before permanent deformation.
4. The finished runner bottom plate is compressed (tensile and torsion) to 5 times the height (length or working limit torsion angle) under the working limit load, and the fourth and fourth of the height (or length and angle) are measured at the same value Five times, it is considered that there is no permanent deformation.
For any other questions please contact us by sales@shangxincaster.com
