Mar 26, 2024 Leave a message

What are the differences between different casters?

EU type swivel brake heavy casters TPR tire

Since casters come in different types, they can be used in different industries. The wheels of these industries can and cannot turn. So, what are the differences and differences between casters that can swivel and those that cannot swivel?

 

These two kinds of swivel casters have different uses due to their different functions. Rotating wheels can be used for food transportation in restaurants, while non-rotating wheels can be used for more mechanized food transportation. Because those non-rotating universal wheels are made of harder materials, many factories use such universal wheels, which are much better than that wheel.

 

1 Check the visible wear degree on the tire surface. "Grind spots" on the surface of the tire can indicate the accumulation of foreign matter. Debris such as steel wire may be wrapped around the wheel. Remove the bolts and nuts on the wheel and clean the debris. Check wheel bearings for damage. If the parts are not damaged, they can be reassembled and used again. If you often encounter the phenomenon that the wheels are entangled in debris, it is recommended to install an anti-entanglement cover to avoid this.

 

2. Loose casters or jammed casters can also cause "grinding points". For proper maintenance and inspection, caster manufacturers should especially check the tightness of the bolts and the amount of lubricant. Replacing damaged casters can improve the rolling speed of the equipment. performance and rotational flexibility.

 

3. Resistance performance test:

The casters should be kept dry and clean when testing this performance. Place the caster on a metal plate insulated from the ground, keep the edge of the wheel in contact with the metal plate, and apply 5% to 10% of the rated load on the caster. Use an insulation resistance tester to measure the resistance value between the caster and the metal plate (nominal open circuit voltage is 500V, the measured resistance value fluctuates within 10%, and the product loss is no more than 3W). For conductor type casters, the resistance value should not be greater than 104 ohms, and the resistance of the casters should be between 105 and 107 ohms.

 

4 Impact test:

Any item may produce collision and vibration due to transportation, use, storage and other conditions, making the product unable to be used normally for a period of time. Furniture is often susceptible to impact due to its size, weight and other characteristics, and the casters at the bottom must be used to determine the placement of the furniture. Whether it is stable or not, it should have good impact resistance.

 

Any further questions please kindly let us know by sales@shangxincaster.com or whatsapp + 86 152 5836 8162

Send Inquiry

whatsapp

Phone

E-mail

Inquiry