
Swivel casters are so-called swivel casters whose structure allows horizontal 360-degree rotation. Caster is a general term, including movable caster and fixed caster. Fixed casters have no swivel structure and cannot be rotated horizontally, only vertically. These two casters are generally used in combination. For example, there are two fixed wheels at the front of the structure of the trolley, and two movable swivel casters at the rear near the push armrest.
Swivel casters are widely used in industrial and daily life products, so we should also pay attention to maintenance methods. How to repair the caster?

First, the visual degree of wear on the tire surface is detected. "Flat spots" on the surface of the tire may indicate a buildup of foreign matter. Debris such as thread ends and iron wires may become entangled on the wheels. Remove the bolts and nuts from the wheel and clean up debris. Check the wheel bearings for damage. If the parts are not damaged, they can be reassembled and used again. If the wheels are often entangled by debris, it is recommended to install an anti-winding cover to avoid.
Loose swivel casters or stuck wheels can also cause "flat spots." Proper maintenance and inspection, especially checking the tightness of the bolts and the amount of lubricating oil, can improve the rolling performance and turning flexibility of the equipment by replacing the damaged swivel casters.

Severely damaged or loose rubber tires may cause unstable rolling, air leakage, abnormal load, damage to the bottom plate, etc. Timely replacement of dam aging tires and bearings can reduce downtime costs due to caster damage.
After inspecting and repairing a wheel, make sure the bolts and nuts are tight and use lock washers or locknuts on all bolts if possible. If the bolts are loose, tighten them immediately. If the wheels mounted on the stand come loose, the wheels may be damaged or unable to turn.
For any other questions please contact us by sales@shangxincaster.com





