
1. Power load:
We recommend that the single wheel load of your casters should be designed to be 1/3 of the total load of the mobile equipment and equipment. (Designed according to the configuration of 4 casters per device).
2. Configuration of casters and tire materials:
A. Single-wheel structure has flexible operation and small starting force and rotation force. However, if you need to obtain high load capacity and high stability, you should choose a two-wheel design.
B. In general, casters with larger diameters are easier to roll and control than casters with smaller diameters.
C. Hard ground requires soft material treads, while soft ground or carpet wheels are recommended to use hard ground material treads.
D. The difference in the rotation structure of the caster bracket has a greater impact on the use of the equipment. Generally speaking, the ball bearing rotation structure is more flexible and quiet to use, and is suitable for use on equipment with low load-bearing requirements and frequent movement. The double-bead-channel pressed rotating structure has a relatively large load and good stability in use, and is suitable for medical equipment that moves less.
E. The environment in which casters are used is also an important factor to consider. Most casters use steel brackets with galvanized or chromium-plated surfaces to prevent rust. We think it is better to use fully plastic or plastic-covered casters in corrosive environments. Good choice.
3. In order to ensure better results when using casters, when choosing medical casters, you must fully consider the particularities of your equipment and caster installation. The installation of casters must meet the following requirements:
A. Correct and safe installation at the designated location
B. The installation location must have sufficient strength and good attachment points.
C. At all times, ensure that the main axis of rotation of the bracket is perpendicular to the rolling ground of the wheels.
D. Ensure that the wheel surface and wheel axle pin are vertical
E. If only universal wheels are used on the equipment, they must be of the same model.
F. Accessories on medical equipment must not interfere with the operation of the casters.
Maintenance work must be done during the use of casters. The usual maintenance methods are: lubricate the shaft and rotating bearings, remove debris, and retighten the shaft or any adjustable accessories.
Any further questions please kindly let us know by sales@shangxincaster.com or whatsapp + 86 152 5836 8162





