Sep 05, 2023 Leave a message

Precautions for the correct use of casters

spring heavy duty PU wheels

1. Use of casters: casters are installed on trolleys and machines. They are performed with intermittent human power. As a bearing, please choose the appropriate caster installation according to the usage.


2. Selection of casters: Shangxin Casters recommends that when selecting casters, please use the total load of the vehicle as the selection criteria. The maximum load of the product refers to the safety limit of the single caster.

 

3. Installation of pedal wheels: use the same series of wheels for installation, please ensure that the installation plane is a horizontal universal type, and please ensure that the rotating shaft should be oriented vertically to the casters. Please make sure the two wheels are parallel, using bolts, nuts, washers, tighten the casters until there is no gap.

 

4. Speed of use: In the application of discontinuous human motion, the diameter of the wheel below 75 mm, the speed of the caster wheel above 100 mm, the speed of km/h, the speed of 4 km/h, the use of power and traction, please separate consult.

 

5. Use environment: The pedals are designed with a normal temperature structure, please use them on flat ground, and avoid walking on the ground with obvious unevenness such as acid, water, salt, oil, and water.

PU casters of one set

6. Braking: The brake rotates with the wheel. Long-term use will cause wear and tear, which will reduce the braking ability. Please check the wear degree of the brake disc when using it. Do not push hard when braking.

 

7. Setting conditions, do not exceed the maximum load of the load, this product is suitable for flat ground, please do not drop from a high place to avoid impact.

 

8. Quality management: Quality inspection includes caster walking performance test, single wheel rotation performance test, rotation performance test, surface corrosion resistance test, salt spray test, plastic material impact test, hardware and plastic hardness test, brake test, etc. (related data available from the company).

 

9. All thick first batch products are guaranteed for one year from the date of production. If the quality problems caused by raw materials or production process are replaced by the caster factory, we are not responsible for the damage caused by improper use, overloading, modification, etc.

 

10. It cannot exceed the maximum load capacity specified in the instruction, and the safety rate when using more than four wheels is 80% of the maximum load.

 

11. Unless otherwise specified, please use according to the specified temperature (5 ~ 60 ℃). Please see specific specifications for special order products.

 

12. Shangxin brand casters suggest not to use bolts and nuts when installing casters and wheels.

 

 

Any further questions please kindly let us know by sales@shangxincaster.com or whatsapp + 86 152 5836 8162

Send Inquiry

whatsapp

Phone

E-mail

Inquiry