Sep 30, 2024 Leave a message

Polyurethane Brake Heavy Duty Caster Resistance Selection Direction

6 inch EU type rubber casters brake


When moving items, the selection direction of the heavy-duty caster resistance of Polystanone Brake Ester determines the medium-sized 3-inch polyurethane swivel caster, whose weight is the weight of the object being handled. The reason for using the wheel is to make it save a lot of energy by itself, so it also requires it to haveGood flexibility. Only in this way can I get a lot of energy to save it, but there are also usually some wheels that will show a lot of bulkiness. Of course, you often consider the weight of the items being moved against each other, and then decide which wheel to use. If it is relatively low, you need to choose a flexible product. Because it is small, the mass is relatively light, so the mass is relatively light. Naturally, the most basic performance is naturally saving. Shanghai casters cannot ignore the weight of the moving items due to energy. When some large weights are moved, it is usually difficult to achieve adaptability. Different natures, when I choose a wheel, I must first pay attention to the weight of the moving items.

 

In the medium-sized 3-inch Polystanone Brake Ester, there will be many employees, and different employees are responsible for different stages of polyurethane production. For example, some people are on the production line of hot wheels. On the production line, no matter what production line he is, the final wheel must be a qualified wheel factory. Everything is a manufacturer, such as mobile phones, different mobile phone brands have different manufacturers. In the production place of the product. When using the wheel, the user should identify the wheel and its supporting product to carry, and select the appropriate load wheel for use.

 

The estimated measurement to be performed before use, and the weight of the selected multi-stable brake ester caster and its supporting product should be greater than 1.5 times the weight of the heavy object. Choose different raw wheels for different purposes: Different raw materials have different physical and chemical properties. The raw materials of the wheel are different, and the environment of the occasion is different, which will lead to different life spans of the wheel. When using the steering wheel, the user should understand the appropriate occasions of the wheel to avoid unnecessary losses.

 

Useful maintenance of the wheel: The user should regularly maintain the working parts of the wheel. Since swivel casters have different types, they can be applied to different industries. The wheels of these industries can rotate or swivel. So what is the difference and difference between swivel and inability to swivel? For these two general-purpose wheels, there are different uses due to different functions. Swivel wheels can be used for food transportation in restaurants. Polyurethane brake ester heavy casters instead of rotor wheels can be used for highly mechanized food transportation. Since the production material of the general-purpose wheel that does not rotate is relatively hard, many factories use such a general-purpose wheel, which is much better than this wheel. "The grinding points on the tire surface can indicate the accumulation of foreign matter, such as steel wire and other debris can be wrapped around the wheel, remove the bolts and nuts on the wheel, and clean up the debris. Check whether the wheel bearing is damaged. Continue to use. If the wheel is often entangled by the wheel, it is recommended to pretend to be a reverse cover to avoid it. 20,000 facing wheels are loose or stuck. The wheel will also be willing to cause "grinding points" maintenance and inspection.

 

The wheel manufacturer especially checks the tightness of the bolts and the amount of lubricating oil. Replacing the damaged caster can improve the rolling performance and rotation flexibility of the equipment. 3 Resistance performance test: When testing this performance, the caster should be dry Dry and clean. Place the caster. On a metal plate insulated from the ground, hold the edge of the wheel with the metal plate, and apply 5% to 10% of the rated load on the caster. Use an insulation resistance tester to measure the resistance value between the caster and the metal plate (nominal open-circuit voltage 5007 measured resistance value fluctuates within 10%, the product loss of the conductive caster is not more than 3M, the resistance value should not be more than 104 ohms, the resistance of the caster should be between 105 and 10 ohms, storage and other conditions may cause collision and vibration, so the product cannot be used normally for a period of time. Furniture is usually easy to affect due to its own size and weight.

 

 

for any assistance please send email to sales@shangxincaster.com whatsapp: +86 152 5836 8162

Send Inquiry

whatsapp

Phone

E-mail

Inquiry