Apr 08, 2020 Leave a message

Issues to be noted when installing casters

The correct installation of casters can make the equipment handling and moving objects much easier, but different combinations of caster installations have different effects on the movement of the equipment. The following are the most common installation methods.

1. Install 3 casters, all of which are universal wheels

The installation combination of 3 universal wheels is suitable for the transportation of barrel-shaped and small equipment, and the good maneuverability is better than the 4-wheel installation method with the same specifications.

2. Install 3 casters, 1 universal wheel, 2 directional wheels

1 universal wheel and 2 directional wheels are suitable for short-haul transportation of low-center of gravity and light-weight equipment, with good direction control and economy.

3. Install 4 casters, 2 universal wheels, 3 directional wheels

2 universal wheels, 3 directional wheels installation combination is a conventional assembly method, 2 directional wheels at the front, and 2 movable universal wheels near the push handrail at the rear, suitable for long and short distance transportation of heavy equipment, economic and durable.

4. Install 4 casters, all of them are directional wheels

The four directional wheels have a diamond-shaped layout design, which is suitable for long straight distance transportation of heavy equipment and cannot be used on sloped working surfaces.

5. Install 4 casters, 2 universal wheels with brakes, 2 directional wheels

2 universal belt brake wheels, 2 directional wheels installation combination method, 2 directional wheels at the front, and 2 universal belt brake wheels at the rear near the push armrest. This assembly method is suitable for long and short distances and sloped roads.

6. Install 4 casters, all of which are universal wheels

The four universal installation methods are suitable for short-distance transportation of heavy equipment and have excellent directionality. They are often used in factory workshops. It is used for turnover work in the factory floor.

7. Install 6 casters, 4 universal wheels, 2 directional wheels

4 universal wheels, 2 directional wheels installation combination is suitable for long-distance transportation of heavy equipment and extended table, good handling, for horizontal contact surface.


Send Inquiry

whatsapp

Phone

E-mail

Inquiry