Casters are mainly divided into medical casters, industrial casters, furniture casters, supermarket casters, etc. The requirements for medical casters are ultra-quiet, chemical resistance, and flexible steering.
See how industrial swivel casters are made
1. Squeeze the steel plate into the punching machine according to the size, and punch a round hole on the plate. Mainly use Q235 material.

2. Put the punched sheet into the die, and punch out the bracket and brake seat.

3. Lubricate the stamped bowl plate. The number of steel balls is mandatory, put a stand on the bowl plate, fill the stand with lubricating oil and steel balls.

4. After installing the steel ball, install the baffle plate and gasket, hydraulically split the oil cylinder of the bowl plate, and rivet the small bowl and the bracket together. Steel balls are also sealed to the bracket and bowl plate.

5. Put the rubber into the machine to melt and push it through the mold onto the rubber wheel. The rough edge of the rubber wheel seal should be polished smooth. (Wheels also have PP, PA, PU, TPR, nylon, pig iron, cast steel, phenol, etc.

6. Put the shaft into the center hole of the rubber wheel, connect the rubber wheel and the bracket with screws, and install the nut. Finally, the machine tests the caster, and the caster is completed.

It can be seen that the stress point of the swivel caster is not in the center of the caster. Why eccentric, it takes more effort, otherwise you can't rotate without eccentricity. The "concentric ring" can turn without external force. This prevents cars from going straight. The line is wobbly, but the eccentric design of the wheel is to increase the torque, the greater the eccentric rotation, the more work it takes.

The rolling direction of the casters should be consistent with the forward direction. If the forward direction of the trolley does not match the rolling direction of the casters, the frictional force of the ground will generate a moment on the rotating shaft, and push the universal wheels to the same position as the walking direction through the steel balls. rotate.
Generally, casters are installed with directional wheels, and the back is swivel casters, which control the direction. The directional wheels are used for walking, with small torque and strong force, but there are swivel casters in front of the stroller, like a supermarket shopping cart. . The four casters are swivel casters, which are caused by the use environment and habits.
For any other questions please contact us by sales@shangxincaster.com





