Caster bearing installation method:
1. Generally, roller bearings are only installed before the bearing is packaged. General grease lubrication, cleaning, direct filling of grease. Lubricating oil is lubricating and generally does not need to be cleaned, but instruments or high-speed bearings should be cleaned with clean oil and the anti-rust agent on the bearings should be removed. Bearings with anti-rust agents removed will easily rust, so they cannot be ignored. If grease enters the bearing for cleaning, it cannot be used directly.
2. The bearing installation method varies depending on the bearing structure, fit, and conditions; generally speaking, as the shaft rotates, the inner ring should be full of interference. Cylindrical bearings, multiple presses or multiple thermal loading methods. Taper position, direct loading on the tapered shaft, or sleeve loading.
3. When installed into the shell, there is usually a lot of clearance fit and the outer ring is redundant. It is usually pressed into the press, or there is also a shrink fit method after cooling. The water in the air will be concentrated on the bearing surface, dry ice acts as a coolant, and cold shrinkage is suitable for loading. Therefore, appropriate rust prevention measures need to be taken.
Caster bearings are very important for casters. There are many types of bearings used in casters. Without it, casters lose their value. Therefore, Ningbo Shangxin Casters recommends that the ideal bearing should be suitable for the respective application and ensure the necessary safety margin. In addition to the caster surface, caster diameter and swivel bearings, caster bearings determine the maneuverability of the wheel and even the quality of the caster.
Any further questions please kindly let us know by sales@shangxincaster.com or whatsapp + 86 152 5836 8162
