The heavy duty swivel casters uses 6204 or 6205 bearings, thick steel plates as brackets, the thickness of brackets is 8mm, 10mm, etc., and the casters are cast with high-quality iron core polyurethane.
The heavy duty swivel casters is a special industrial caster. Because it needs to have universal turning and overweight at the same time, it usually has a load capacity of more than 1 ton, so it has extremely strict requirements in production technology. Everyone must carefully check the corresponding load-bearing capacity when choosing. In addition to load capacity and universal turning, we also need to pay special attention to whether there is a need for shock absorption, whether there is a need for brakes, and whether the brakes are single brakes or double brakes, and so on!

The heavy duty swivel casters --Size
Method of wear condition by checking The heavy duty swivel casters
1.Loose swivel casters or wheel jamming can also cause "wear points". Proper maintenance checks, especially checking the tightness of bolts, the amount of lubricating oil and replacing damaged casters, can enhance the rolling performance and rotation flexibility of the equipment.
2.Serious breakage or looseness of rubber casters may lead to unstable rolling, air leakage, abnormal load, and bottom plate damage, etc. Replacing damaged casters and bearings in time can reduce the cost loss caused by shutdown due to caster damage.
3.Check whether the wheel bearing is damaged. If the parts are not damaged, they can be reassembled and continued to be used. If the wheel is often entangled by sundries, it is recommended to assemble an anti-entanglement cover to avoid it.





